Shaped ventilating products
Description
- BrandСобственное производство
- Country of manufactureKazakhstan
The request to send your applications by e-mail too_deronstroy@mail.ru
Since January 5, 2016 the accumulative system of discounts is entered. Details by ph. 8 (7172) 47-27-17, 8 (7172) 47-27-57.
On own production in Astana we make all types and the sizes of air ducts and shaped products of galvanized and stainless steel, filters ventilating, filters zhiroulavlivayushchy of galvanized and stainless steel, exhaust umbrellas of all types, ventilating umbrellas, noise suppressors, a throttle – the valve, the gate ventilating, other not standard products for systems of ventilation and air conditioning.
High quality of geometry and tightness of air ducts and shaped products is provided with numerous machines and automatic transfer lines. Cutting of metal is carried out by the machine of plasma cutting. Experience since 2009.
In the modern more and more extending construction market, together with the growing requirements imposed to ventilating systems also complexity of buildings, and respectively and complexity air of the carrying-out highways grows. To provide various branches, transitions to other sections and their sizes, turns and bends, there are ventilation elements which it is accepted to call shaped products. Thus not one project on ventilation does not do without them.
Shaped products are, as a rule, made of the same materials, as the main air ducts. The list of ventilating air ducts and shaped products is rather wide, but the skilled designer specifies in the specification on the equipment their exact characteristics that allows to make quickly the estimate according to the specification.
Shaped elements of our production:
- branches
- transitions
- tees
- crosspieces
- ducks
- umbrellas
- inserts
- couplings
Experts are ready to count as ours the specification of any complexity and to make you the developed offer, on the basis of the provided data, in the shortest possible time.
Branch ventilating 90 ° round section is intended for the smooth direction of system of an air duct at an angle 90 ° across or verticals.
For the order there is a symbol:
d ― diameter (mm)
α ― angle of rotation °
R ― radius of turn (mm)
At R=d ― it is not specified
R = x d
Radius of turn is equal in standard branch to its diameter.
Radius if necessary, can be
any
Additional opportunities:
transitional branch
any length of a neck
any radius of turn
intermediate diameters
any corner turn
Transition is ventilating round
There is a symbol for the order:
I type ― tsentrlny
II type ― unilateral
The III type ― with mixture.
d1 ― diameter (mm)
d2 ― diameter (mm)
At the order of non-standard length to specify: Length (mm) ― L.
Shift (mm) ― With ― for type 3
I type
central
II type
unilateral
III type
with mixture
The tee is ventilating round
The tee ventilating round section ― is a shaped detail which is used at installation of air ducts of round section. A main goal of use of tees – accession of branches to the main channel.
IV type of tees ventilating round section:
I type
There is a symbol for the order:
d1 ― diameter (mm)
d2 ― diameter (mm)
L ― length (mm)
N ― height (mm)
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d1
Diameter (mm) ― d2
Length (mm) ― L
Height (mm) ― H
II type
There is a symbol for the order:
d1 ― diameter (mm)
d2 ― diameter (mm)
L ― length (mm)
α ― corner °
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d1
Diameter (mm) ― d2
Length (mm) ― L
Corner ° ― α
III type
There is a symbol for the order:
d1 ― diameter (mm)
d2 ― diameter (mm)
d3 ― diameter (mm)
L ― length (mm)
α ― corner °
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d1
Diameter (mm) ― d2
Diameter (mm) ― d3
Length (mm) ― L
Corner ° ― α
IV type
There is a symbol for the order:
d ― diameter (mm)
H ― height (mm)
A×B ― amount of insert (mm)
n ― flange: 20 (mm), 30 (mm), (without flange: 0)
L ― length (mm)
In < d
L = And + 80 (mm)
N = d/2 + 50 (mm)
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d
Height (mm) ― H
Amount of insert (mm) ― A×B
Length (mm) ― L
The crosspiece is ventilating round
The crosspiece ― is an element of system of ventilation which is used in order that high-quality ventilation of the building since air ducts have to pass in various directions was carried out, providing at the same time a full-fledged stream of fresh air. The crosspiece is intended not only for connection of various air ducts among themselves, but also serves as peculiar "intersection" for an air stream, thereby providing its uniform distribution.
For a standard detail:
H2 = H3 − 0.5d1 + 50 (mm)
If l> (d2 + d3) / 2 + 120 (mm), that is an opportunity to consider uses of two tees.
There is a symbol for the order:
d1 ― diameter root
d2 ― diameter (mm)
d3 ― diameter (mm)
L ― length of a detail (mm)
If l = 0, ― not to specify
l ― distance between inserts (mm)
α ― a corner between inserts from d3 to d2, °
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d1
Diameter (mm) ― d2
Diameter (mm) ― d3
Length of a detail (mm) ― L
Height (mm) ― H2,H3
Distance between inserts ― l
The nipple is ventilating
The nipple ― this shaped product which allows to connect among themselves air ducts of one diameter. The nipple ventilating of the same material, as air ducts is made. By means of the nipple, air ducts can be connected quickly a simple roundabout ― they are inserted into the nipple from the different parties then connection is ready and it is possible to continue work with other elements of system of ventilation.
There is a symbol for the order:
d ― diameter (mm)
Total length of the nipple ventilating:
to Ø 500 ― 140 (mm)
to Ø 900 ― 180 (mm)
to Ø 1250 ― 200 (mm)
Additional opportunity:
total length of the nipple ― is increased
The coupling is ventilating round
The coupling round ventilating is used to connection of air ducts and shaped products. The coupling is manufactured of galvanized steel. Diameter of the coupling can be standard and non-standard. The coupling differs from the nipple in what puts on from above on the fastened details. At the order of the coupling the following parameters are specified: d ― diameter (mm). If the non-standard length of the coupling is required, then it is also necessary to specify total length.
The cap is ventilating round
The cap round for an air duct in systems of ventilation carries out a role of a partition which regulates a stream of the air coming to the room on an air duct and also carries out protective function. The cap interferes with hit of dirt and alien objects in an air duct of system of ventilation.
Duck ventilating round
The ventilating duck of round section ― this special shaped product which is intended for connection in the place of joints of raznourovnevy air ducts or those air ducts which are more to the right or is more left than each other. In this case they are either above, or the friend to the friend is lower on the relation.
There is a symbol for the order:
d1 ― diameter (mm)
d2 ― diameter (mm)
L ― length of a detail (mm)
H ― height (mm)
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d1
Diameter (mm) ― d2
Length (mm) ― L
Height (mm) ― H
Note:
If d1 = d2, then is specified one size.
Throttle valve for air ducts of round section
Throttle valves of round section from galvanized steel.
Throttle valves are applied in systems of air heating, conditioning, ventilation.
They are established in places of a branching of air ducts or on trunk mains. Alignments of aerodynamic resistance intend generally for regulation of a consumption of air in system also.
The product consists of a cloth, sector of management and a branch pipe. On a throttle valve, to be exact on its knot of management, the shovel which can be turned by means of the handle is established (it is located on outer side of the valve). Regulation of a stream is carried out by means of change of an angle of rotation of a shovel which blocks valve section under the required corner. The handle located from the outer side of the valve operates a shovel. Position of a shovel is fixed by a nut lamb, the angle of rotation is established by means of the graduated scale.
Throttle valves are created as with the electric drive, and hand-operated.
To make a throttle valve galvanized steel is used. The throttle the valve of round section is made with nippelny, flange or bandage connection.
The Vivavent company is engaged in production of products only hand-operated. The throttle the valve with round section is made with a rubber sealant and if the client wishes, then and without it.
Umbrella roof for a round air duct
The umbrella roof is used for protection of external part of an air duct of round section against hit in system of ventilation of an atmospheric precipitation. The lower part of an air duct is equipped with nippelny connection. Openings for emission of air can be closed by a grid.
There is a symbol for the order:
The deflector is roof ventilating
The deflector is a special exhaust device which is installed in mine to increase draft in the channel and to increase system effectiveness of ventilation. The connecting sizes of deflectors have the same sizes, as well as the normalized number of air ducts. Deflectors are delivered as in the collected, and sorted look.
There is a symbol for the order:
d ― diameter (mm)
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d
Diameter (mm) ― D
Height (mm) ― H
Insert is ventilating round
Insert is a type of a shaped detail which is necessary for installation in an air duct wall. There are 3 types of inserts: Insert a ventilating straight line ― is applied to a rectangular air duct when it is necessary to build in an air duct of round section in an air duct of rectangular section. Insert ventilating round ― is applied to a round air duct on purpose accession of an air duct of round section to a similar air duct. Insert ventilating angular for a round air duct.
Insert a ventilating straight line for a rectangular air duct.
There is a symbol for the order:
d ― diameter (mm)
I-length (mm)
Height of insert is L ― (at the request of the customer)
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d
Length (mm) ― I
Height of insert (mm) - L
Pass knot through a roof for air ducts
The pass knot through a roof in places where the air shaft is brought to a building roof is applied.
There is a symbol for the order:
d ― diameter (mm)
H ― height (mm).
α ― corner °
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d
Height (mm) ― H
Corner ° ― α
Shiber ventilating round section
Shiber of round section for trim of a branch of an air duct from the general system of ventilation.
Shiber is a locking control device which is used in systems of ventilation. It consists of the directing panel and a steel cloth. If the shiber has the small sizes, the cloth moves in a pocket if its sizes are big, the leaf moves towards corners. Only dimensions of the regulating shiber depend on the sizes of an air duct. Work in the mode otkr./zakr. If the shiber has the big sizes and not completely to open him, then additional noise will be created. 45 degrees to the blocked highway are made at an angle if are used in systems of aspiration.
The main function of a shiber is regulation of an air stream in air ducts which are made of galvanized steel. The round shiber is issued with nippelny connection.
For production of a shiber thin-sheet galvanized steel which has thickness from 0,55 to 1 mm is used. Thickness of a steel sheet fluctuates depending on diameter and the section of a detail. On the design the shiber looks as a metal pocket.
Also shiber slanting and direct distinguish. Slanting are applied in systems of pneumotransport and aspiration. And direct shiber – in systems of all-exchange ventilation (exhaust and stitched).
These designs are used most often in systems of heating of air, ventilation, conditioning. The main thing that the internal pressure of system did not exceed 1000 PASES. As usual they are established in proximity to an exhaust opening of the fan on air duct pipe section.
Shiber is very important device which carries out regulation of air streams in various systems.
Flexible inserts of round section for air ducts
Flexible inserts for air ducts are intended for elimination of the vibration caused by work of this or that equipment (the fan, stitched installation, etc.) to avoid transfer of vibration on all system of air ducts.
Flexible inserts of round section are made of the special wearproof material "robast" which fastens to galvanized landing elements.
Backpressure valve
The RSK backpressure valve is used for installation in round air ducts. Backpressure valves from galvanized sheet steel Izgotovlivatsya. The valve can be installed in vertical position since two gates are sprung.
RSK backpressure valve.
Since January 5, 2016 the accumulative system of discounts is entered. Details by ph. 8 (7172) 47-27-17, 8 (7172) 47-27-57.
On own production in Astana we make all types and the sizes of air ducts and shaped products of galvanized and stainless steel, filters ventilating, filters zhiroulavlivayushchy of galvanized and stainless steel, exhaust umbrellas of all types, ventilating umbrellas, noise suppressors, a throttle – the valve, the gate ventilating, other not standard products for systems of ventilation and air conditioning.
High quality of geometry and tightness of air ducts and shaped products is provided with numerous machines and automatic transfer lines. Cutting of metal is carried out by the machine of plasma cutting. Experience since 2009.
In the modern more and more extending construction market, together with the growing requirements imposed to ventilating systems also complexity of buildings, and respectively and complexity air of the carrying-out highways grows. To provide various branches, transitions to other sections and their sizes, turns and bends, there are ventilation elements which it is accepted to call shaped products. Thus not one project on ventilation does not do without them.
Shaped products are, as a rule, made of the same materials, as the main air ducts. The list of ventilating air ducts and shaped products is rather wide, but the skilled designer specifies in the specification on the equipment their exact characteristics that allows to make quickly the estimate according to the specification.
Shaped elements of our production:
- branches
- transitions
- tees
- crosspieces
- ducks
- umbrellas
- inserts
- couplings
Experts are ready to count as ours the specification of any complexity and to make you the developed offer, on the basis of the provided data, in the shortest possible time.
Branch ventilating 90 ° round section is intended for the smooth direction of system of an air duct at an angle 90 ° across or verticals.
For the order there is a symbol:
d ― diameter (mm)
α ― angle of rotation °
R ― radius of turn (mm)
At R=d ― it is not specified
R = x d
Radius of turn is equal in standard branch to its diameter.
Radius if necessary, can be
any
Additional opportunities:
transitional branch
any length of a neck
any radius of turn
intermediate diameters
any corner turn
Transition is ventilating round
There is a symbol for the order:
I type ― tsentrlny
II type ― unilateral
The III type ― with mixture.
d1 ― diameter (mm)
d2 ― diameter (mm)
At the order of non-standard length to specify: Length (mm) ― L.
Shift (mm) ― With ― for type 3
I type
central
II type
unilateral
III type
with mixture
The tee is ventilating round
The tee ventilating round section ― is a shaped detail which is used at installation of air ducts of round section. A main goal of use of tees – accession of branches to the main channel.
IV type of tees ventilating round section:
I type
There is a symbol for the order:
d1 ― diameter (mm)
d2 ― diameter (mm)
L ― length (mm)
N ― height (mm)
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d1
Diameter (mm) ― d2
Length (mm) ― L
Height (mm) ― H
II type
There is a symbol for the order:
d1 ― diameter (mm)
d2 ― diameter (mm)
L ― length (mm)
α ― corner °
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d1
Diameter (mm) ― d2
Length (mm) ― L
Corner ° ― α
III type
There is a symbol for the order:
d1 ― diameter (mm)
d2 ― diameter (mm)
d3 ― diameter (mm)
L ― length (mm)
α ― corner °
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d1
Diameter (mm) ― d2
Diameter (mm) ― d3
Length (mm) ― L
Corner ° ― α
IV type
There is a symbol for the order:
d ― diameter (mm)
H ― height (mm)
A×B ― amount of insert (mm)
n ― flange: 20 (mm), 30 (mm), (without flange: 0)
L ― length (mm)
In < d
L = And + 80 (mm)
N = d/2 + 50 (mm)
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d
Height (mm) ― H
Amount of insert (mm) ― A×B
Length (mm) ― L
The crosspiece is ventilating round
The crosspiece ― is an element of system of ventilation which is used in order that high-quality ventilation of the building since air ducts have to pass in various directions was carried out, providing at the same time a full-fledged stream of fresh air. The crosspiece is intended not only for connection of various air ducts among themselves, but also serves as peculiar "intersection" for an air stream, thereby providing its uniform distribution.
For a standard detail:
H2 = H3 − 0.5d1 + 50 (mm)
If l> (d2 + d3) / 2 + 120 (mm), that is an opportunity to consider uses of two tees.
There is a symbol for the order:
d1 ― diameter root
d2 ― diameter (mm)
d3 ― diameter (mm)
L ― length of a detail (mm)
If l = 0, ― not to specify
l ― distance between inserts (mm)
α ― a corner between inserts from d3 to d2, °
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d1
Diameter (mm) ― d2
Diameter (mm) ― d3
Length of a detail (mm) ― L
Height (mm) ― H2,H3
Distance between inserts ― l
The nipple is ventilating
The nipple ― this shaped product which allows to connect among themselves air ducts of one diameter. The nipple ventilating of the same material, as air ducts is made. By means of the nipple, air ducts can be connected quickly a simple roundabout ― they are inserted into the nipple from the different parties then connection is ready and it is possible to continue work with other elements of system of ventilation.
There is a symbol for the order:
d ― diameter (mm)
Total length of the nipple ventilating:
to Ø 500 ― 140 (mm)
to Ø 900 ― 180 (mm)
to Ø 1250 ― 200 (mm)
Additional opportunity:
total length of the nipple ― is increased
The coupling is ventilating round
The coupling round ventilating is used to connection of air ducts and shaped products. The coupling is manufactured of galvanized steel. Diameter of the coupling can be standard and non-standard. The coupling differs from the nipple in what puts on from above on the fastened details. At the order of the coupling the following parameters are specified: d ― diameter (mm). If the non-standard length of the coupling is required, then it is also necessary to specify total length.
The cap is ventilating round
The cap round for an air duct in systems of ventilation carries out a role of a partition which regulates a stream of the air coming to the room on an air duct and also carries out protective function. The cap interferes with hit of dirt and alien objects in an air duct of system of ventilation.
Duck ventilating round
The ventilating duck of round section ― this special shaped product which is intended for connection in the place of joints of raznourovnevy air ducts or those air ducts which are more to the right or is more left than each other. In this case they are either above, or the friend to the friend is lower on the relation.
There is a symbol for the order:
d1 ― diameter (mm)
d2 ― diameter (mm)
L ― length of a detail (mm)
H ― height (mm)
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d1
Diameter (mm) ― d2
Length (mm) ― L
Height (mm) ― H
Note:
If d1 = d2, then is specified one size.
Throttle valve for air ducts of round section
Throttle valves of round section from galvanized steel.
Throttle valves are applied in systems of air heating, conditioning, ventilation.
They are established in places of a branching of air ducts or on trunk mains. Alignments of aerodynamic resistance intend generally for regulation of a consumption of air in system also.
The product consists of a cloth, sector of management and a branch pipe. On a throttle valve, to be exact on its knot of management, the shovel which can be turned by means of the handle is established (it is located on outer side of the valve). Regulation of a stream is carried out by means of change of an angle of rotation of a shovel which blocks valve section under the required corner. The handle located from the outer side of the valve operates a shovel. Position of a shovel is fixed by a nut lamb, the angle of rotation is established by means of the graduated scale.
Throttle valves are created as with the electric drive, and hand-operated.
To make a throttle valve galvanized steel is used. The throttle the valve of round section is made with nippelny, flange or bandage connection.
The Vivavent company is engaged in production of products only hand-operated. The throttle the valve with round section is made with a rubber sealant and if the client wishes, then and without it.
Umbrella roof for a round air duct
The umbrella roof is used for protection of external part of an air duct of round section against hit in system of ventilation of an atmospheric precipitation. The lower part of an air duct is equipped with nippelny connection. Openings for emission of air can be closed by a grid.
There is a symbol for the order:
The deflector is roof ventilating
The deflector is a special exhaust device which is installed in mine to increase draft in the channel and to increase system effectiveness of ventilation. The connecting sizes of deflectors have the same sizes, as well as the normalized number of air ducts. Deflectors are delivered as in the collected, and sorted look.
There is a symbol for the order:
d ― diameter (mm)
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d
Diameter (mm) ― D
Height (mm) ― H
Insert is ventilating round
Insert is a type of a shaped detail which is necessary for installation in an air duct wall. There are 3 types of inserts: Insert a ventilating straight line ― is applied to a rectangular air duct when it is necessary to build in an air duct of round section in an air duct of rectangular section. Insert ventilating round ― is applied to a round air duct on purpose accession of an air duct of round section to a similar air duct. Insert ventilating angular for a round air duct.
Insert a ventilating straight line for a rectangular air duct.
There is a symbol for the order:
d ― diameter (mm)
I-length (mm)
Height of insert is L ― (at the request of the customer)
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d
Length (mm) ― I
Height of insert (mm) - L
Pass knot through a roof for air ducts
The pass knot through a roof in places where the air shaft is brought to a building roof is applied.
There is a symbol for the order:
d ― diameter (mm)
H ― height (mm).
α ― corner °
Any ratio of the sizes is possible (taking into account technological restrictions).
Diameter (mm) ― d
Height (mm) ― H
Corner ° ― α
Shiber ventilating round section
Shiber of round section for trim of a branch of an air duct from the general system of ventilation.
Shiber is a locking control device which is used in systems of ventilation. It consists of the directing panel and a steel cloth. If the shiber has the small sizes, the cloth moves in a pocket if its sizes are big, the leaf moves towards corners. Only dimensions of the regulating shiber depend on the sizes of an air duct. Work in the mode otkr./zakr. If the shiber has the big sizes and not completely to open him, then additional noise will be created. 45 degrees to the blocked highway are made at an angle if are used in systems of aspiration.
The main function of a shiber is regulation of an air stream in air ducts which are made of galvanized steel. The round shiber is issued with nippelny connection.
For production of a shiber thin-sheet galvanized steel which has thickness from 0,55 to 1 mm is used. Thickness of a steel sheet fluctuates depending on diameter and the section of a detail. On the design the shiber looks as a metal pocket.
Also shiber slanting and direct distinguish. Slanting are applied in systems of pneumotransport and aspiration. And direct shiber – in systems of all-exchange ventilation (exhaust and stitched).
These designs are used most often in systems of heating of air, ventilation, conditioning. The main thing that the internal pressure of system did not exceed 1000 PASES. As usual they are established in proximity to an exhaust opening of the fan on air duct pipe section.
Shiber is very important device which carries out regulation of air streams in various systems.
Flexible inserts of round section for air ducts
Flexible inserts for air ducts are intended for elimination of the vibration caused by work of this or that equipment (the fan, stitched installation, etc.) to avoid transfer of vibration on all system of air ducts.
Flexible inserts of round section are made of the special wearproof material "robast" which fastens to galvanized landing elements.
Backpressure valve
The RSK backpressure valve is used for installation in round air ducts. Backpressure valves from galvanized sheet steel Izgotovlivatsya. The valve can be installed in vertical position since two gates are sprung.
RSK backpressure valve.
We recommend to see